HOME > product > Rebar Insert
Rebar Insert
The rebar insert is based on the basic frame with L-2,400 and customized according to the thickness of steel bars and intervals of placing steel bars required in each construction site. It can be installed more easily than the existing coupler insert and very cost-effective as it covers wide areas.

Comparison between rebar insert and existing coupler insert
Index Rebar Insert Coupler Insert
Constructability Single installation covers 2,400mm
as a maximum.
Installation can be based on the standard marking.		 Separately installed (2 installations = 300m)
In addition to the standard marking, remarking needs to be done according to the intervals.
Availability Multiple successive uses (reuse available) Singple installation (one-time, reclaimed)
Disassemblability 3 normal nails are used for the length of 2,400m
The minimum use of nails makes the separation of veneers easy.		 Use of several nails makes the separation work difficult and the lifecycle of the veneers are reduced.
Cost effectiveness Installation of maximum areas with minimum labor cost.
Excellence in raw material reduction (use of washers and caps are not necessary)
e.g.) One day work for 1,000 square meters :
2 personnel
Approximately 35% of cost reduction in raw materials		 High labor cost and long work hours
Cost increase due to price increase of raw materials. (costs for the use of washers and caps)
e.g.) One day work for 1,000 square meters : 10 personnel